Yamaha xvs650 Supplementary Service Manual page 20

C Fasten the self-canceling turn signal relay lead and
battery positive (+) lead with a battery band.
D Fasten the tail / brake light lead coupler and battery
negative (–) lead coupler with a clamp.
E Fasten the starter relay lead and fuse box lead with
a plastic locking tie.
F To the ignition coil.
G The end of the plastic locking tie should face
towards the under the handlebar.
H Fasten the right handlebar switch lead with a plastic
locking tie.
CABLE ROUTING
I Pass the right handlebar switch lead behind the
upper bracket.
J Cross the throttle cable in front of the guide wire.
K Fasten the brake hose grommet with a brake hose
holder.
L Place the left handlebar switch coupler on the side
of the main switch.
M Fasten the brake hose with a brake hose holder.
N Pass the left handlebar switch lead under the main
switch.
–12–
SPEC