Chapter 3. Cabinet Installation
4. Attach the mounting brackets to the four corners of the back side of the
Figure 3-2. Cabinet mounting bracket
5. Install four screws in the wall studs according to the dimensions given in
Figure 3-3. Cabinet wall-mounting
6. Hang the cabinet on the wall by placing the mounting brackets over the
7. Tighten the screws to secure the cabinet.
3-4
cabinet.
M et al M ount i ng
Br acket
Figure 3-3. (Note that the width dimension is different for the DBS 40.)
The screws are used to attach the mounting brackets to the wall. The
screws should protrude from the wall 5/16 in.
Scr ew
( #10- 1 3/ 4)
M ai n C abi net
Back Si de
17 5/ 8"
( D BS 72, 96)
13 7/ 16"
( D BS 40)
screws.
DBS Manual - Revised April 2000
St ud
W al l
22 3/ 16"
5/ 16"
Section 300-Installation
DBS-2.3/9.2-300