Alarm Reset; Alarm Suspension - Panasonic WJ-MP204C Operating Instructions Manual

Alarm Reset

Alarms are reset according to the reset mode (EXT, auto (1S-5M) or OFF) selected in the ALARM OUTPUT setup.
• Manual resetting
Pressing the RESET button on the unit resets the activated alarm.
Pressing the ALARM RESET button on the controller resets the activated alarm.
• External resetting
Input to the ALARM/REMOTE terminal resets the activated alarm when the terminal is set to the alarm input mode.
• Auto resetting
Elapsing of the preset time resets the activated alarm, except for the unit's alarm indicator which remains on steady light.

Alarm Suspension

This function is used in the setup operation or whenever you do not wish to accept alarm inputs.
Press the ALARM SUSPEND button on the front panel, or ALM SUSPEND on the controller. Alarm inputs will be ignored
while the indicator is lit.
Press the button again to release the alarm suspension. Alarm inputs will be accepted after the indicator turns off.
Function
Camera Selection
Alarm Reset
Alarm Suspend
Alarm Suspend
Reset
29
WJ-MP204C
4
1 2 3
ALARM
RESET
ALARM
SUSPEND
SET
ALARM
SUSPEND
SET
WV-CU360C
Enter a camera number with
numeric buttons.
CAM
CAM
then
#
SET
ALM RESET
ALM RECALL
ALM SUSPEND
ALM SUSPEND