Setup Procedures; Prior To Setup; Confirmation; To Open Or Close The Setup Menu - Panasonic WJ-MP204C Operating Instructions Manual

SETUP PROCEDURES

Prior to setup

Confirmation

1. Connections and switch settings are complete.
2. Switch on the power of the connected system devices
including the monitor that displays the menus.
3. Turn on the power of the WJ-MP204C.
4. When setting at the camera site, remove the front cover
from the unit to make access possible to the buttons on
the front panel.
5. When setting with use of a WV-CU360C System
Controller, confirm that the OPERATE indicator is lit on
the Controller, meaning that the unit is ready for opera-
tion.
UNIT
ALARM
0
RESET SUSPEND
SET
1 2
MONITOR
OPERATE LOGIN ALARM UNIT
PROGRAM
SETUP CAM SETUP
SHIFT
FUNCTION CAM FUNCTION
ALM RESET ALM SUSPEND AUTO
ALM RECALL B/W
VCR CAM
MULTI SCREEN SELECT DEF
AUX 2
STILL EL-ZOOM WIPER
– + AUX 1
SEQ PAUSE SEQUENCE PATROL PLAY MON
SLOW
PATROL PATROL ESC
STOP LEARN

To open or close the setup menu

1. Hold down the SETUP/ESC button on the front panel for
2 seconds. Image display will change to the menu win-
dow on the monitor, or vice versa.
2. When using a WV-CU360C, hold down the SETUP but-
ton on the controller for 2 seconds. The setup menu will
open or close.
19
ALARM
SET UP
SUSPEND
ALARM
ESC
3 4
Data Multiplex Unit WJ-MP204C
CAMERA BUSY PROHIBITED
System Controller
IRIS
CLOSE OPEN
IRIS RESET
UNIT A FOCUS
NEAR FAR
UNIT
AUTO FOCUS
L
UNIT B
ZOOM
WIDE TELE
CAM HOME/PRESET
LOGOUT
SET PROGRAM
PRESET
On the window, you can select and enter the parameter
using buttons. A sub menu will open when a line having
a [return

Buttons used in the setup

The following buttons are used in the setup. Operations on
the following pages are explained on the assumption that
the front panel buttons on the WJ-MP204C are used. Check
below which WJ-MP204C front panel buttons are equivalent
to the buttons on the WV-CU360C.
• Data Multiplex Unit WJ-MP204C
[C] button: Moves the cursor downward.
360
[D]: Moves the cursor upward.
WV-CU C
[–]: Decreases the parameter value.
[+]: Increases the parameter value.
UP
[SET]: Validates the selected parameter, or opens a
sub menu when [
R
[ESC]: Returns the menu to a higher layer.
DOWN
• System Controller WV-CU360C
L
L R
DOWN
STILL
–
WJ-MP204C SETUP MENUX.XX
COMMUNICATION
SYSTEM
] mark at its end is selected.
] appears.
UP
R
: Moves the cursor up and down.
EL-ZOOM
: Increases or decreases the parame-
ter value.
+
CAM : Validates the selected parameter, or
opens a sub menu when [
SET
appears.
MON
: Returns the menu to a higher layer.
ESC
]