Maintenance; Standard Time Switch Program For Heating Circuit And D.h.w - Siemens RVA47.320 User Manual

Benefit
Description
Setting
!
Caution
Effect
Standard values
Siemens Building Technologies
HVAC Products

Maintenance

3.18 Standard time switch program for heating
circuit and d.h.w.
•
Straightforward resetting of all time switch programs to their standard values
The standard time program resets the time settings of all time switch programs. For this
purpose, the controller is supplied with non-volatile factory settings.
1. Press the operating line selection buttons to select line 23.
2. Press the + / - buttons for 3 seconds.
The standard time program is activated as soon as the display changes to 1.
Display
0 / 1
In that case, the individual settings will be lost!
The time settings for the time switch programs will be overwritten with standard values.
This applies to the following settings:
• Switching times of time switch program "heating circuit"
• Switching times for d.h.w. program
Switching point
Period 1 ON
Period 1 OFF
Period 2 ON
Period 2 OFF
Period 3 ON
Period 3 OFF
Basic Documentation RVA47.320
Description of the enduser settings
Unit
-
Setting line
Heating circuit D.h.w.
6 30
7 31
8 32
9 33
10 34
11 35
...
...
Standard time
06 : 00
22 : 00
– – : – –
– – : – –
– – : – –
– – : – –
49/166
CE1P2379E
15.07.2002