Specifications; Maintenance And Repairs - Stihl FSE 52 Instruction Manual

English

Specifications

Motor
Voltage: 220 - 240 V
Frequency: 50 / 60 Hz
Rated current: 2.3 A
Engine power: 500 W
Rated speed under load: 6000 rpm
Fuse: min. 10 A
Insulation: II, E
Length
1140 mm to 1310 mm (depending on
selected shaft length)
Weight
complete with cutting attachment and
deflector
1)
FSE 52 :
1)
Version with 10-meter appliance
cord for the UK: 2.8 kg
Noise and Vibration Data
Noise and vibration data are determined
on the basis of the rated maximum
speed.
For further details on compliance with
Vibration Directive 2002/44/EC visit
www.stihl.com/vib.
18
Sound pressure level L
91
83 dB(A)
Sound power level L
94 dB(A)
Vibration level a
Left handle:
Right handle:
The K-factor in accordance with
Directive 2006/42/EC is 2.5 dB(A) for
the sound pressure level and sound
power level; the K-factor in accordance
with Directive 2006/42/EC is 2.0 m/s
for the vibration measurement.
REACH
REACH is an EC regulation and stands
for the Registration, Evaluation,
Authorisation and Restriction of
Chemical substances.
For information on compliance with the
2.2 kg
REACH regulation (EC) No. 1907/2006
see www.stihl.com/reach.
to EN 50636-2-
p
to EN 50636-2-91
w
to EN 50636-2-91
hv
2
3.0 m/s
2
4.5 m/s
2

Maintenance and Repairs

Users of this machine may only carry out
the maintenance and service work
described in this user manual. All other
repairs must be carried out by a
servicing dealer.
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer. STIHL dealers are
regularly given the opportunity to attend
training courses and are supplied with
the necessary technical information.
When repairing the machine, only use
replacement parts which have been
approved by STIHL for this power tool or
are technically identical. Only use high-
quality replacement parts in order to
avoid the risk of accidents and damage
to the machine.
STIHL recommends the use of original
STIHL replacement parts.
Original STIHL parts can be identified by
the STIHL part number, the {
logo and the STIHL parts symbol K
(the symbol may appear alone on small
parts).
FSE 52