Konica Minolta bizhub Pro 951 Additional Information page 35

2.2 The Workflow of Both Sides Adjust
4
Press [Print Mode].
5
Press Start on the control panel.
A test chart will be output.
6
Press [Close].
7
Measure the length of lines for each point from [1] to [8] printed on the chart.
% The figure below shows an example of measuring [1] and [5].
% You can enter the value in 0.1 mm increments.
% Be sure to make note of the measured length.
bizhub PRESS 1250/1250P/1052, bizhub PRO 951
[ 5 ]
[ 1 ]
[ ] 5
[1] [2]
[ ] 6
[ ] 3 [ ] 4
[ ] 7
[ ] 8
2
2-17