Konica Minolta bizhub Pro 951 Additional Information page 25

2.2 The Workflow of Both Sides Adjust
8
Scan the adjustment chart.
Press [Start] on the Scan Adjustment Chart Screen.
When scanning is properly completed, the counter of [Number of Scanning] on the Scan Adjustment
Chart Screen is added by one, and the blue frame displayed in the illustration on the screen shifts to
the next one on the right side. If you move the adjustment chart before the blue frame shifts to the next,
the measurement may not be performed properly.
% If the ADF is open, the following dialog is displayed and you cannot start scanning. Close the ADF,
and then press [Close] on the dialog.
bizhub PRESS 1250/1250P/1052, bizhub PRO 951
2
2-7