Fujitsu PRIMERGY CX400 M1 System Configurator And Order-Information Manual page 6

Configuration diagram
CX400 M1 for PRIMERGY CX2570 M1/M2 12x 2.5" HDD (S26361-K1530-V200)
System unit (I)
board
Memories
Memory CPU1
(Channel A + B + C + D)
Bank 1 (2 Modules)
Bank 2 (2 Modules)
Bank 3 (2 Modules)
Bank 4 (2 Modules)
Memory CPU2
(Channel E + F + G + H)
Bank 1 (2 Modules)
Bank 2 (2 Modules)
Bank 3 (2 Modules)
Bank 4 (2 Modules)
Memory ( III )
SATA RAID 0/1
support on-board
Extension slots for
Modular RAID (VII)
Ext. SAS and SCSI Controller (IX)
Fibre Channel Controller (X)
Communication/Network (XI)
Slot 15-18: For only GPGPU/Grid/XeonPhi
PCIe-3 x16
Slot 5-8: For only GPGPU/Grid/XeonPhi
PCIe-3 x16
Slot 11-14: PCIe-3 x16 (low profile, half length)
(170mm incl. bracket)
left slot from rear view
Slot 1-4: PCIe-3 x16 (low profile, half length)
(170mm incl. bracket)
right slot from rear view
slot1-4/5-8@CPU1, slot11-14/15-18@CPU2
Key:
Included in basic unit
Liquid Cooling is not possible
CPUs
Xeon 4C-18C (M1)
Xeon 4C-22C (M2)
CPU incl. Heatpipe
Xeon 4C-18C (M1)
Xeon 4C-22C (M2)
CPU incl. Heatpipe
UFM 4G/8G
SATADOM
or or
Fujitsu Technology Solutions x86 PRIMERGY Server
System configurator and order-information guide
PRIMERGY CX400 M1
front side
Drive Bay (VI)
Bay for 6x 2.5" (Type A)
Only with SAS / SATA
Bay for 6x 2.5" (Type B)
2x SAS / SATA / PCIe +4x SAS / SATA
Dummy HDD cage
Hard disk drives (VI)
HD5
2.5"x1" SAS 2.5"x1" SAS
or SATA
HD4
2.5"x1" SAS 2.5"x1" SAS
or SATA
HD3
2.5"x1" SAS 2.5"x1" SAS
or SATA
HD2
2.5"x1" SAS 2.5"x1" SAS
or SATA
HD1
2.5"x1" SAS 2.5"x1" SAS
or SATA
HD0
2.5"x1" SAS 2.5"x1" SAS
or SATA
=Option
Status 2016-10-31
HD5
or SATA
HD4
or SATA
HD3
or SATA
HD2
or SATA
HD1
or SATA or PCIe
HD0
or SATA or PCIe
6 of 33