Fujitsu PRIMERGY CX400 M1 System Configurator And Order-Information Manual page 16

E1
CX25y0 M1
Registered Memory (RDIMM) with SDDC (chipkill) support
- one DDR4 registered ECC memory Module, 1.2V
Choose up to 8 order codes per CPU
8GB (1x8GB) 1Rx4 DDR4-2133 R ECC
16GB (1x16GB) 2Rx4 DDR4-2133 R ECC
8GB (1x8GB) 1Rx4 DDR4-2133 R ECC
16GB (1x16GB) 2Rx4 DDR4-2133 R ECC
32GB (1x32GB) 2Rx4 DDR4-2133 R ECC
up to 8x
Registered Memory (RDIMM) no SDDC (chipkill) support
per CPU
- one DDR4 registered ECC memory Module, 1.2V
Choose up to 8 order codes per CPU
8GB (1x8GB) 2Rx8 DDR4-2133 R ECC
8GB (1x8GB) 2Rx8 DDR4-2133 R ECC
Load Reduced Memory (LRDIMM) with SDDC (chipkill) support
- one DDR4 load reduced ECC memory Module, 1.2V
Choose up to 8 order codes per CPU
32GB (1x32GB) 4Rx4 DDR4-2133 LR ECC
64GB (1x64GB) 4Rx4 DDR4-2133 LR ECC
F
Minimum one memory module or order code per CPU = first memory
S26361-F3843-E614
S26361-F3843-E616
*S26361-F3843-E604
*S26361-F3843-E606
S26361-F3843-E617
S26361-F3843-E615
*S26361-F3843-E605
S26361-F3844-E617
S26361-F3844-E618
Fujitsu Technology Solutions x86 PRIMERGY Server
System configurator and order-information guide
PRIMERGY CX400 M1
Note 1)
Max. DDR4 memory speed depends on the memory configuration
(No of mem modules per channel) as well as on the CPU type.
The memory channel with the lowest speed defines the speed
of all CPU channels in the system
For real memory speed (depending on memory type / population),
please check the spreadsheet "Memory speed" below
Note 2)
Mix of memory modules is only possible within the same group
Loose delivery available for Air Cooling,
NOT available for Liquid Cooling
For Liquid Cooling, S26361-F3844-E618 *
must be handle as Special Release.
Status 2016-10-31
16 of 33