Mounting The Loop Handle - Stihl FS 260 R Instruction Manual

English
14
15
14
Attach the throttle cable (14) to the
N
retainer (15).
16
Swiveling the handlebar
Transport position
15
Loosen the wing screw (3) and
N
unscrew it until the handlebar (7)
can be rotated.
Rotate the handlebar 90°
N
counterclockwise and then swing
the handles down.
Tighten down the wing screw (3)
N
firmly.
Working position
Reverse the sequence described
N
above to swing the handles up and
turn the handlebar clockwise.

Mounting the Loop Handle

Using the Barrier Bar
3
7
A barrier bar may have to be mounted to
suit the tool you intend to use – see
"Approved Combinations of Cutting
Attachment, Deflector, Handle and
Harness".
The barrier bar comes standard with the
machine or is available as a special
accessory.
FS 240, FS 240 C, FS 240 R, FS 240 RC, FS 260 R, FS 260 RC