Stihl FS 260 R Instruction Manual page 27

Full harness
Fitting the full harness is described in
detail in the instruction sheet supplied.
1
2
Put on the full harness (1).
N
Adjust the length of the strap so that
N
the carabiner (2) is about a hand's
width below your right hip.
Balance the brushcutter.
N
FS 240, FS 240 C, FS 240 R, FS 240 RC, FS 260 R, FS 260 RC
Attaching Machine to Harness
2
1
2
2
The type and style of the harness and
carabiner (spring hook) depend on the
market.
Attach the carabiner (1) to the
N
carrying ring (2) on the drive tube.
Disconnecting Machine from Harness
1
1
1
2
Press down the bar on the
N
carabiner (1) and pull the carrying
ring (2) out of the carabiner.
Throwing Off the Machine
WARNING
The machine must be quickly thrown off
in the event of imminent danger.
Practice removing and putting down the
machine as you would in an emergency.
To avoid damage, do not throw the unit
to the ground when practicing.
Practice quickly detaching the power
tool from the carabiner as described
under "Disconnecting Machine from
Harness".
English
1
2
1
2
25