Panasonic WV-CS854B Operating Instructions Manual page 31

3. Open the SET UP menu to stop learning.
Notes:
• It is recommended to set PAN LIMIT to ON for
patrol-learn. Otherwise PAN LIMIT is invalid in
playback.
• If the power fails in the patrol-learn mode, start
the patrol-learn function again from the starting
point.
• LEARN also stops 1 minute after starting if the
memory is full.
• Auto refreshing may be activated in the patrol
play mode or the auto mode to calibrate the lens
position.
Patrol Play with a Controller Having the PATROL
Key
1. Press the PATROL PLAY key. The camera turns to
the starting point and reproduces the operations
stored in the memory. Iris operation is valid only in
the playback mode.
2. Press the PATROL STOP key and PROGRAM key
simultaneously to stop playback or press any
manual operation
ZOOM/FOCUS) except the iris keys.
Patrol Play with a Controller not Having the PATROL
Key
1. Select patrol play in the setup menu, and then close
the menu. The camera turns to the starting point and
the operations stored in memory are reproduced.
Iris operation is valid only in the playback mode.
2. Open the SET UP menu, or press any of manual
operation keys (e.g., PAN/TILT/ ZOOM/FOCUS)
except the iris keys to stop playback.
Patrol Play with the AUTO PAN Key
1. If the PATROL PLAY function is assigned to the
AUTO PAN key, press the AUTO PAN key to turn the
camera back to the starting point and to reproduce
the operation data stored in the memory.
2. To stop playback, press the PATROL STOP key or
any manual operation key (e.g., PAN/ TILT/ ZOOM/
FOCUS) except the iris keys.
Notes:
• In the patrol play mode, the camera movement may
occasionally deviate from the entered routine when
the routine includes a move to a preset position. If
this happens, re-enter the routine of manual
operations for patrol-learn.
• In the patrol play mode, black and white automatic
switching does not work.
• In the patrol play mode, when the power of the
controller is turned on or off, the patrol play stops. In
this case, press the PATROL PLAY key again. (If
SELF RETURN is set to ON, the patrol play will start
again after elapsing the setting return time.)
key (e.g., PAN/TILT/
G Alarm Input/Output (ALARM IN/OUT)
Move the cursor to ALARM IN/OUT, and press the CAM
(SET) key. The ALARM IN/OUT submenu appears.
PRIVACY ZONE
PROPO.P/T
AREA TITLE
PATROL
ALARM IN/OUT
CLEANING
EL-ZOOM
PRESET ALM
IMAGE HOLD
TILT ANGLE
RET
Note: While the camera is in the AF mode or the lens
moves between WIDE and TELE, alarm input may
be ignored if several alarm inputs are received in
succession.
ALARM IN 1-4
Alarm input signals are supplied from external devices
through the ALARM IN connector to turn the camera to
a preset position.
1. Move the cursor to ALARM IN 1* and select a preset
position or OFF with the joystick, then press the
CAM (SET) key.
The factory default setting is OFF.
ALARM IN 1
ALARM IN 2
ALARM IN 3
ALARM IN 4
CNT-CLS 1
TIME OUT
CNT-CLS 2
COAX ALM OUT
RET
* Set ALARM IN 2, 3 and 4 in the same way as
ALARM IN 1.
1 POSI, 2 POSI, 3 POSI and 4 POSI: Preset
position. If an alarm input is received, the
camera turns to a preset position, and sends an
alarm output signal. The position number
corresponds to the alarm input number (1-1, 2-2,
3-3 and 4-4).
B/W: Available for ALARM INPUT 4 only. The
camera changes its mode from color to black
and white if ALARM IN 4 is supplied.
OFF: The camera ignores alarm inputs.
-31-
** SPECIAL 1 **
OFF
ON
ON(USER)
STOP
OFF
ON
OFF
OFF
0°
** ALARM IN/OUT **
OFF
OFF
OFF
OFF
OFF
100MS
OFF
OFF