Stihl FR 480 C Instruction Manual page 18

English
Installing the Flexible Shaft
1
2
3
N Remove the protective cap from
one end of the shaft.
N Push the end of the flexible shaft (1)
into the sleeve (2) until it engages –
turn the shaft back and forth at the
same time.
N Remove the protective cap from the
other end of the shaft.
N Push the flexible shaft into the
powerhead coupling (3) until it
engages – turn the shaft back and
forth at the same time.
N Keep the protective caps in a safe
place.
16
Mounting the Loop Handle with
Barrier Bar
1
1
1
N
Fit the square nuts (1) in the barrier
bar (2) – make sure the holes line
up.
1
2
2
1
2
4
5
7
N Place the clamp (3) in the loop
handle (4) and position them both
against the drive tube (5).
N Fit the clamp (6).
N
Place the barrier bar (2) in position
as shown.
N Line up the holes.
N
Insert the screws (7) in the holes
and screw them into the barrier bar
as far as stop.
N Go to "Securing the Loop Handle".
3
6
7
FR 480 C