Table of Contents
Advertisement
TV Output
This menu lets you set the RF output of the Digital Satellite Receiver to either CH 3 or
CH 4. You can connect the Digital Satellite Receiver to your television, even if your TV
does not have video inputs.
Procedure
r
In SETUP menu, press p or q buttons to highlight TV Output.
r
Press u to change the TV output settings.
r
Press p or q to select CH 3 or 4.
r
Press ACTION button to save the selection.
Note:
Prior to adjusting this feature, make sure that your TV is set either CH 3 or 4.
TV output channel that you select in the SETUP menu should be the same as
the television.
R
OLLER
u
Sat Setup
Monitor
System Test
Access Card
u
Channel
TV Output
Warning: Television must be
set to the selected channel!
u
Press
to change TV output settings.
TV Output Screen
G
M
O
UIDE
ENU
PERATIONS
4
43
Advertisement
Table of Contents
