System Test - Panasonic TZ-DRD100 Operating Instructions Manual

Setup : System Test
The System Test menu allows you to invoke a system test which perform a check of
the following subsystems.
Component
Tuning Test
Signal Test
Phone Test
Access Test
Card ID
Note:
The following screens show the system test screen and the system test in progress.
u
Sat Setup
Start
Monitor
Tuning
Status:

System Test

Signal
Status:
Phone
Status:
Access Card
Access Status:
TV Output
Card ID
u
Press to start system test.
System Test Screen
Procedure
r In SETUP menu, press p or q button to highlight System Test.
r Press u button to highlight Start.
r
Press ACTION button to start the System Test.
r Press t button to return to Setup Menu.
Requirement
This attempts to tune to an
known frequency.
This tests the signal strength.
This checks
operational status.
This checks the Access Card
function.
Card is installed in TZ-DRD100
System test is only available for Satellite input.
R G
OLLER UIDE
Display Information
Status: PASSED or FAILED
Status: PASSED or FAILED
the modem Status: PASSED or FAILED
Status: PASSED or FAILED
Serial # xxxx-xxxx-xxxx
u
Sat Setup
Start
Monitor
Tuning
System Test
Signal
Phone
Access Card
Access
TV Output
Card ID
Press ACTION to start the system test.
System Test Screen (System Test in progress)
M O
ENU PERATIONS
Status:
PASSED
Status: PASSED
PASSED
Status:
Status: CHECKING
322452186
41