Table of Contents
Advertisement
G
S
ETTING
TARTED
Step 1c. Digital Satellite Receiver connection to TV or Monitor
Follow this diagram when connecting the Digital Satellite Receiver to a Television or
Monitor.
SATELLITE
IN
DIGITAL SATELLITE RECEIVER CONNECTION TO TV OR MONITOR
Procedure
•
•
To receive off-air programming (no cable box)
•
•
To receive off-air programming (with cable box)
•
•
•
Note:
18
AUDIO
R
L
VIDEO
INPUT
NTSC OUTPUT
R-AUDIO-L
VIDEO
Connect the VHF (SAT) /UHF OUT to the ANT IN of the television or connect video cable
from the video output jack on the Digital Satellite Receiver to the video input jack on the TV.
Connect audio cables from the left and right NTSC audio output jacks on the Digital
Satellite Receiver to the left and right audio input jacks on the TV.
Turn off the Digital Satellite Receiver or press TV/SAT button to toggle.
Tune TV to desired channel.
Turn off the Digital Satellite Receiver or press TV/SAT button to toggle.
Tune TV to cable box output channel (either CH3 or Ch4).
Tune the cable channels using the cable box.
Modem should also be connected to a telephone jack using the cable supplied RJ11C
cable if impulse pay per view services are desired.
TV
NOTE: A/V CABLES AND MODEM
CABLE INCLUDED.
ANT IN
Incoming signal from
cable or antenna
VHF/UHF
IN
TEL LINE
VHF (SAT) /UHF
OUT
Digital Satellite Receiver
AC IN
Advertisement
Table of Contents
