Epson LX-300+II Reference Manual page 39

Setting
Dithering
Intensity
Print Quality
Halftone Setup.../
Halftone Color
Adjustment...
Halftoning
Printer Font
Setting
Print Text as
Graphics*
Metafile
Spooling*
Paper Order*
Pages Per Sheet*
Copy Count*
Explanation
You can leave this option set to Fine, which is the
default setting, or select another dithering pattern for
the kind of printout you want.
Move the slider to make your printout lighter or darker.
Select a print quality option from the Print quality list.
Set Hi-speed to On to use bidirectional printing, which
increases the print speed. Setting Hi-speed to Off
selects unidirectional printing mode, which is slower
but more precise. Printing with the default settings
uses the settings stored in the printer.
Click this button to set the brightness and contrast,
input the RGB gamma, or make other settings. The
Halftone Color Adjustment window appears. For
details, click the Help button in this window.
Select the type of halftoning to use when printing
graphics. To let the printer determine the best
halftone quality, use Auto Select.
Select a character table group to use: Standard,
Expanded, and None (Bit Image printing).
When Standard or Expanded is selected, the printer
uses the device fonts. Expanded includes more fonts
than Standard.
When None is selected, the printer uses bit map
images instead of the device fonts.
For details on the fonts included in each table, see
page 113.
Select Off when the printer uses the device fonts or On
when it doesn't use the device fonts.
Select whether to use EMF spooling.
Select whether to print from front to back or back to
front.
Select the number of pages that you want to print on
a single sheet of paper.
When you select more than one in the Number of
copies box, this check box appears and you can
select whether to collate the pages of the copies.
Using the Printer Software
39