Epson LX-300+II Reference Manual page 109

12. Attach the paper guide to the cut-sheet feeder as shown
below.
13. Slide the left edge guide to the center until it stops at the
guide mark. Then slide the right edge guide to fit the size of
paper you will use.
Note:
❏ To remove the paper guide from the cut-sheet feeder, press both
release tabs and pull out the paper guide.
❏ Make sure the printer cover is open when you print.
You can easily switch between continuous paper and cut-sheet
feeder paper. See "Switching between continuous paper and
single sheets" on page 16 for details.
Note:
When you print several pages of continuous paper, fold the first
printed page forward at the perforation after the perforation emerges
from below the printer cover. This helps the printer feed the printed
pages properly and prevents paper jams.
Release tabs
Options and Consumables
109