Epson LX-300+II Reference Manual page 111

8. Turn on the printer. Then hold down the LF/FF button to
feed one page.
9. Release the sprocket lock levers on the pull tractor and
adjust the sprockets to match the width of the paper you are
using. Make sure the sprockets on both tractors are aligned
so that the paper is not crooked.
10. Open the sprocket covers. Fit the holes of the paper over the
tractor pins and adjust the sprockets as necessary. Close the
sprocket covers.
11. If there is slack in the paper between the push and pull
tractors, push in and turn the paper feed knob on the right
side of the pull tractor to remove the slack.
12. Make sure the paper is not crooked or wrinkled and then
lock the sprockets in place.
13. Replace the printer cover and the paper guide.
Options and Consumables
111