Dcf Standard - Panasonic PT-P1SDE Operating Instructions Manual

Commercial use
Hide thumbs Also See for PT-P1SDE:
Table of Contents

Advertisement

DCF standard

For data recorded by digital cameras, folder and file names that comply with
the DCF standard will be automatically assigned. The DCF standard has the
following requirements.
Files or folders that do not comply with these requirements cannot be
recognised by the projector. If you change the folder and file names on
computers, the projector may not be able to recognise them correctly.
Folder (directory) name
B Folders are created as sub-folders of the DCIM folder on the SD
memory card.
Data located in folders other than the DCIM folder is not recognized.
B Folder names consist of three numerals (folder number) followed by
five alphanumeric characters. (Example: 100ABCDE)
Numbers between 100 and 999 can be used for the three numerals and
the alphanumeric characters can be taken from the following set of 37
characters: 0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ_(No
distinction is made between upper-case and lower-case alphabetic
characters. Double-byte characters cannot be used.)
B Multiple folders using the same three-digit combination (folder
number) cannot be recognised correctly.
B Folder sub-hierarchies are not supported.
File name
B File names consist of four alphanumeric characters followed by four
numerals (file number), followed by ".JPG" (extension). (Example:
ABCD0001.JPG)
The alphanumeric characters can be taken from the following set of 37
characters: 0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ_and
numbers between 0001 and 9999 can be used for the four numerals (No
distinction is made between upper-case and lower-case alphabetic
characters. Double-byte characters cannot be used.)
B Multiple files using the same four-digit combination (file number)
cannot be recognised correctly.
File format
Only Exif2.2-compliant JPEG images are supported.
NOTE:
B If you convert image formats using ImageCreator 1.5, folder and file
names that comply with the DCF standard will be automatically
assigned. (Folder names consist of three numerals followed by
"PJPCN" and file names consist of "JPCN" followed by four numerals.
Refer to page 32 for details on ImageCreator 1.5.)
66-E
NGLISH
Example of folder structure
DCIM
100_PANA
Folder names that do
not comply with the
MATSUSHITA
DCF standard are not
recognised.
102PJPCN
: Folder
XXXXXXXX.JPG: Name of file
Guide screen for computer connection
Refer to the list below for details on the keyboard commands to change the
output setting.
Keyboard
Manufacturer
command
Panasonic
Fn
+
F
3
NEC
TOSHIBA
Fn
+
F
SHARP
5
HP
FUJITSU
+
Fn
F
10
IMAG0001.JPG
IMAG0002.JPG
TARO0001.JPG
This file cannot be
recognised as there
is another file which
has the same file
number.
JPCN0001.JPG
JPCN0002.JPG
Keyboard
Manufacturer
command
EPSON
Fn
+
F
8
DELL
IBM
Fn
+
F
7
SONY
Fn
+
Other
Apple
F
7
E
-67
NGLISH

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents