Connections; Connecting To Computer; Connecting To Video Equipment - Panasonic PT-P1SDE Operating Instructions Manual

Connections

Notes on connections
B Read the instruction manual for each peripheral device carefully before
connecting it.
B Turn off the power supply for all peripheral devices before making any
connections.
B If the cables necessary for connection are not included with the peripheral
device or available as an option, you may need to prepare a proper cable
for the device concerned.
B If there is a lot of jitter in the video signal, the projected image may flicker.
In such cases, it will be necessary to connect a TBC (time base corrector).
B Refer to the list on page 65 for details on compatible signals which can be
input to the projector.
B Only one audio system circuit is available for the AUDIO IN L-R
connectors, so if you change the audio input source, you will need to
remove and insert the appropriate plugs.

Connecting to computer

RGB signal cable
(accessory)
Computer
22-E
NGLISH

Connecting to video equipment

D-sub15-pin (male) - BNCx5 (male) adapter cable
Red (connect to P
Blue (connect to P
Green (connect to Y signal connector)
DVD player
(with component
video connectors)
BNC/RCA adapter
DVD player
signal connector)
R
signal connector)
B
Video deck
E
NGLISH
-23