Setting Up The Security Function; To Register Sd Key; Inserted Sd Key - Panasonic PT-P1SDE Operating Instructions Manual

Setting up the security function

This projector is equipped with a security function. All of the controls other
than the POWER button are disabled unless the password is entered
correctly or the registered SD memory card is inserted properly.
Press the F or G button on the
remote control unit to select
"SECURITY SETUP", and then
press the ENTER button.
M E N U
P I C T U R E A D J U S T M E N T
P O S I T I O N A D J U S T M E N T
O T H E R S E T U P
L A N G U A G E S E T U P
S E C U R I T Y S E T U P
S D P I C T U R E S E T U P
S E L E C T E N T E R E X I T
P A S S W O R D
O K R E T U R N
(When you use the "SECURITY
SETUP" function for the first time)
Press the F, H, G, I, F, H, G
and I buttons in order, then press
the ENTER button.
(When a password change has
been made before)
Type in the changed password, then
press the ENTER button.
S E C U R I T Y S E T U P
SETUP O F F
A M E N D P A S S W O R D
T O R E G I S T E R S D K E Y 1
T O R E G I S T E R S D K E Y 2
I N S E R T E D S D K E Y -
S E L E C T A D J R E T R N
52-E
NGLISH
Press the F or G button to select
an item, and then press the I or H
button to change the setting.
For items without any selective
setting, press the ENTER button.
The next screen for the item will
then be displayed.
SETUP
You can select the security lock method
for when the power is turned on.
S E T U P O F F
[
S D C A R D
[
P A S S W O R D
OFF
"SETUP" is disabled.
SD CARD
When the power is turned on, the
screen below will be displayed.
Inserting the registered SD card (SD
key) will release the lock.
INSERT SD KEY.
O K
PASSWORD
When the power is turned on, the
screen below will be displayed. Entering
the password will release the lock.
P A S S W O R D
O K
NOTE:
B "SD CARD" will not be displayed
when no SD memory card is
registered.
AMEND PASSWORD
Passwords can be changed.
A M E N D P A S S W O R D
N E W
C O N F I R M
O K R E T U R N
# Set a password by pressing the
F F ,G G ,I I , and H H buttons.
A maximum of 8 buttons can be set.
$ Press the ENTER button.
% Enter the password again for
confirmation.
& Press the ENTER button.
NOTE:
B The entered password will
appear as . It will not be
displayed on the screen.
B If you enter the wrong password,
the letters "PASSWORD" and
"NEW" will become red. Enter
the correct password again.

TO REGISTER SD KEY 1(2)

You can register up to 2 SD
memory cards as a SD key.
NOTE:
B "SD key 2" can be registered
after "SD key 1" has been
registered. Register "SD key 2" in
the same way as for "SD key 1".
(When you register the SD key
for the first time)
# The "INSERT SD KEY 1 FOR
REGISTRATION." screen will
be displayed.
INSERT SD KEY 1
FOR REGISTRATION.
O K R E T U R N
$ Insert the SD memory card
which you would like to
register as a SD key 1.
% Press the ENTER button.
(To change the registered SD key)
# The "INSERT SD KEY." screen
will be displayed.
INSERT SD KEY.
O K R E T U R N
Insert the current SD key.
$ Press the ENTER button.
The "INSERT SD KEY 1 FOR
REGISTRATION." screen will be
displayed.
% Remove the current SD key,
insert the new SD memory
card which you would like to
register as a SD key and press
the ENTER button.
NOTE:
B If you insert a SD memory card
which has not been registered
as SD key, the letters on the
screen will become red. Insert
the correct SD key again.

INSERTED SD KEY

This shows whether the inserted SD
memory card is registered as a SD
key.
-
The inserted SD memory card has
not been registered as a SD key.
1
SD key 1
2
SD key 2
E -53
NGLISH