Connector Panel - Panasonic PT-P1SDE Operating Instructions Manual

SD operation buttons
<Projector control panel: page 16>
%
# #
&
$
# SD
/ button
These buttons are used to select folders and files on the SD selection
screen.
<When a file is being played back>
Press the SD button to switch to the previous file, and the SD
button to switch to the next file.
You can start and stop the slide show by holding down the SD
$ SD ENTER button
This button is used to accept the selection made on the SD selection
screen.
% SD RETURN button
This button is used to return to the previous screen.
& SD ROTATE button
Each press of this button rotates the still image being played back 90
degrees clockwise.
18-E
NGLISH
<Remote control unit: page 16>
%
RETURN
ENTER
# #
$
ROTATE
&
button.

Connector panel

# $ %
(
# PC IN connector (pages 22 and 23)
This connector is used to input PC signals and YP
$ S-VIDEO IN connector (pages 23 and 47)
This connector is used to input signals from S-VIDEO-compatible
equipment such as a DVD player. The connector is S1 signal compatible,
and it automatically switches between 16:9 and 4:3 aspect ratios in
accordance with the type of signal being input.
% VIDEO IN connector (page 23)
This connector is used to input video signals from video equipment such
as a video deck.
& AUDIO IN L-R connectors (pages 22 and 23)
' Security lock
This can be used to connect a commercially-available theft-prevention
cable (manufactured by Kensington). This security lock is compatible with
the Microsaver Security System from Kensington.
( Power input socket (AC IN) (page 26)
The accessory mains lead is connected here.
Do not use any mains lead other than the accessory mains lead.
&
'
P signals.
B R
E -19
NGLISH