Options - Konica Minolta bizhub c550 Quick Manual

Options

This section describes the configuration of the options installed on this machine.
By adding options, various office needs can be satisfied.
No. Part Name
1 Main unit
2 Authentication unit (biometric type)
AU-101
3 Working table WT-502
4 Fax multi line ML-501
5 Large capacity unit LU-301
6 Finisher FS-517
7 Finisher FS-608
8 Punch kit PK-512
C550
Description
The document is scanned by the scanner section, and the scanned image is
printed by the printer section.
Performs user authentication by scanning vein patterns in the finger.
Provides an area to temporarily place a document or other materials. This is
also used when the authentication unit (biometric type) is installed.
Installed to increase the telephone lines available for faxing.
Can be loaded with up to 3,000 sheets of plain A4-size paper. Can be loaded
with the following A4-size paper: 2,500 sheets of thick paper 1, 1,750 sheets
of thick paper 1+, 1,550 sheets of thick paper 2 or 1,300 sheets of thick paper
3.
Feeds out finished printed pages. The "Sort" setting (separating by copy set),
"Group" setting (separating by page), and Staple settings ("Corner" and "2
Positions") are available.
Feeds out finished printed pages. The "Sort" setting (separating by copy set),
"Group" setting (separating by page), Staple settings ("Corner" and "2
Positions"), "Half-Fold", "Center Staple & Fold", and "Tri-fold" are available.
Installed onto the finisher to allow hole punching to be used.
x-47