Clearing paper misfeeds
If a paper misfeed occurs, a screen like the one shown below appears with the location of the misfeed indicated.
To clear the misfeed, check the location indicated in the screen, and then perform the necessary operation.
A flashing "
" indicates the location of the paper misfeed.
A lit "
" indicates areas where paper may have been misfed and that should be checked.
Paper misfeed locations
18
For details on misfeeds 1 through 15, refer to page x-33 of this manual and perform the appropriate operation.
For details on misfeed 16 to 18 (finisher FS-608), refer to page x-34 of this manual and perform the appropriate
operation.
For details on misfeed 16 to 18 (finisher FS-517), refer to page x-35 of this manual and perform the appropriate
operation.
Note
For details on the procedures for clearing paper misfeeds, refer to chapter 4, "Troubleshooting", of the User's
Guide [Copy Operations].
x-32
2
17
16
1
3 4
11
12
13
14
15
5
6
7
8
10
9
C550