Konica Minolta bizhub PRO C1060L Quick Manual page 66

5.1 Both Sides Adjustment
N
Press [Start] on the [Scan Adjustment Chart] screen.
The adjustment chart is scanned.
When scanning is properly completed, the
counter of [Number of Scanning] on the Scan
Adjustment Chart screen is added by one, and
the blue frame displayed in the illustration on the
screen shifts to the next one on the right side.
-
If you move the adjustment chart before the
blue frame shifts to the next, the
measurement may not be performed
properly.
- If the ADF is open, scanning fails, and a
message is displayed. Close the ADF, then
press [Close] in the message dialog box.
-
If scanning fails, a message may be
displayed. Follow the on-screen instructions
to correctly place the adjustment chart and
background sheet, then press [Close].
- If you press [Return] on the Scan Adjustment
Chart screen during scan measurement, a
message is displayed to confirm whether to
interrupt the scan measurement. To discard
the previous measurement result, press
[Yes]. Retry the scanning process from the
first scan measurement. When continuing
scan measurement, press [No].
5-7