Huawei HG658 Configuration Manual page 4

Modem Configuration Guide
To use Wireless, ensure that you already have set up your wireless adapter.
1. Open the Charms Bar by moving your mouse pointer to the top corner of the screen and then moving your
mouse pointer down. If you have a touch screen, simply swipe from the right side of the screen to the left.
2. Click Settings inside the Charms Bar.
3. Find the SSID (network name) of your modem
and click Connect By default, the network name
should be TPG-xxxx (xxxx is a random 4 digit
alpha numeric code).
4. Select the Wi-Fi network you wish to connect to.
By default, the Wi-Fi access point name (SSID) is
TPG –xxxx (xxxx is a random 4 digit alphanumeric code)
5. Enter the network security key (Wi-Fi password)
and then click Next. By default, the network
security key is the same as your TPG Password
you use to log into Your Account.
5. CHANGE OF PASSWORD
For security purposes we highly recommend that you change your password if you are using your default or if you believe your
password security has been compromised. For password information, please visit www.tpg.com.au/support.
PLEASE NOTE:
Each time your modem is powered on, it will initialize this automated authentication process after which your modem will
receive a public IP address (fixed or dynamic depending on your plan) and DNS settings from TPG.
tpg.com.au/support 13 14 23
HG658
4