Table of Contents
Advertisement
38
Add Stocks: To activate the Add Stocks feature, rotate the scroll
wheel or press the channel up/down buttons on the remote
control to highlight Add Stocks on the display as shown in Figure
35; then press the Select button as instructed in the top banner of
the screen. The display momentarily indicates an access wait
period for about 3 seconds (Figure 40), after which the Enter
Symbol display appears with a blinking cursor as shown in
Figure 41 .
STOCK TICKER MODE
...Please Wait...
Figure 40. Add Stocks Access Wait Display
ROTATE DIAL FOR SYMBOLS
Enter Symbol
Figure 41. Enter Stock Symbols Display Screen
Using the Add Stocks Cursor: When the Enter Symbol display
appears with the blinking cursor, you are prompted to press the
Select button; however, you must first choose the first letter of
Advertisement
Table of Contents
