Table of Contents
Advertisement
18
1. Press the Select button on the main unit (power (
the Remote Control). The Receiver turns on; the XM logo (
appears for 2 seconds, slowly fading to black, after which the
Audiovox A logo (
display then appears for the tuning mode in effect prior to turnoff.
(See Figure 7.)
Check ANTENNA
!
Figure 7. XM® and Audiovox Power On Logo Display
2. Rotate the scroll wheel, or use the channel up/down buttons on
the remote control to select the desired channel, or use the
category buttons to select and tune to a desired channel based
on genre.
Menu Options
To enter the Menu Options screen, press the menu button on either
the remote control or the CommanderMT unit. Using the scroll
wheel, or channel up/down buttons, highlight the option you wish to
adjust; then press the Select button to enter the selected menu item.
To enter a related sub-menu from the chosen menu item, rotate the
scroll wheel or press the channel up/down buttons on the remote
control. The menu options are available in the following order:
) appears for 10 seconds. The default
!
) button on
Check ANTENNA
)
Advertisement
Table of Contents
