Table of Contents
Advertisement
21
Frequency Setting:
The selected frequency must be an unused frequency or a fre-
quency used by a low-powered FM station in your area. If not,
the strong signal from the FM station may overpower the FM
transmitted signal which may result in interference.
Upon entering this mode, any FM transmitter frequency can be
chosen using the scroll wheel or the channel up/down buttons on
the remote control for frequency selection. Press the Select but-
ton to enter the new frequency setting (Figure 11), or press the
menu button to return to the FM frequency page with no change
to frequency.
PRESS XM BUTTON TO SELECT
88.1
FM frequency
MHz
Figure 10. Select FM Frequency Display
FM FREQUENCY SET
FM frequency Set
Figure 11. FM Frequency Set Display
Advertisement
Table of Contents
