Select Fm Frequency Off Display - Audiovox Commander MT XMRVRFM002 User Manual

Xm satellite radio receiver system

Hide thumbs Also See for Commander MT XMRVRFM002:

Table of Contents

To select and/or change the FM frequency mode, press the Select

button to access the FM frequency sub-menu. When this occurs, the

FM Frequency Off (or the selected frequency, if active) display

(Figure 9) appears. The FM transmitter will be Off by default. To turn

the FM transmitter on, rotate the scroll wheel or press the channel

up/down buttons on the remote control to highlight the desired fre

quency (88.1, 88.3, 88.5,.......107.9) and press the Select button. (See Fig-

ure 10.) To exit this function, press the menu button. (No button activ-

ity for 15 seconds will exit this function.)

ROTATE DIAL TO SELECT

Off

FM frequency

Figure 9. Select FM Frequency Off Display

Table of Contents