Dvd Setup Menu - Audiovox VME 9120 Manual

The Audio menu will automatically exit after a few seconds of inactivity. To exit quickly, touch the bottom left corner of the
screen.
Setup Menu (SET)
To access the Setup Menu, touch the top left corner of the screen to view the SOURCE menu, and then select the "SET"
option. The SET menu options are as follows:
• LOUD OFF/ON: When listening to music at low volumes, this feature will boost the bass and treble ranges to compensate for the characteristics
of human hearing. Touch the arrows to turn LOUD OFF/ON.
• BEEP OFF/ON: Touch the arrows to turn the audible BEEP confirmation OFF/ON.
• 24 HOURS/12 HOURS: Select 12 or 24-hour clock display.
• Clock: Touch the left arrow to set the hour and the right arrow to set the minutes.
• SUB OFF/ON: Select "ON" if an external subwoofer is connected.
• CAMERA OFF/ON: When a rear-view camera is properly installed, the System will automatically display the rear camera image when the vehicle
is placed in reverse gear. To view the camera image regardless of the gear setting, select "ON".
• MIRROR OFF/ON: Select "ON" to reverse the screen image for rear view camera use.
• LCD CALIBRATE: Touch and hold to initiate screen calibration. Touch the + marks when prompted.
• VOL LAST/ADJUST
• VOL LAST: When turned on, the unit will resume the same volume level that was set when the unit was last turned off.
• VOL ADJUST: Select this option if you want to set a turn-on volume (A-VOL) regardless of the volume setting prior to turning the unit off.
• A VOL: Touch the arrows to set the desired turn-on volume when VOL ADJUST is selected.
• US BAND/EURO BAND: Touch and hold to select "EURO BAND". The unit will automatically turn off and re-boot when the tuner band is changed
System Reset
To correct a system halt or other illegal operation, use the tip of a pen to press the reset button (9) located on the front bottom-left corner of the
unit. After a system reset, the unit restores all factory default settings.
NOTE: If the unit is reset while a DVD is playing, the DVD resumes play once the reset is complete.

DVD SETUP MENU

During disc play, press the DVD SETUP button (29) on the remote control to access the SYSTEM SETUP menu.
System
language
Video
Use the , ; , , or cursor buttons to choose between SYSTEM, LANGUAGE, or VIDEO setup options.
14