Panasonic DP-8060 Operating Instructions Manual page 154

■ Sending via Internet Relay
To a location that does not
have a pre-programmed Relay
Station
NOTE
154
Downloaded From ManualsPrinter.com Manuals
Advanced Internet Fax Features
Relayed Transmission
1
or
(To use the Platen Glass,
see page 17.)
5
LONDON RLY
Assign a Relay Station.
• Only one destination can be programmed as a relay station.
8
• If the transmission fails, an error response is delivered from the mail server, and is
printed on this machine. The error response contains an error message, and a copy of
the first page of document to alert you of the transmission failure.
1. If the Relay Station requires a special access number to get an outside line, enter that access number
first then press Pause key to enter a pause (represented by a "-") before entering the full number.
2. The "#" character is not available for the email address of the relay station.
2
The document(s) is stored into memory, and your machine starts
sending the document(s) to the Relay email address of the Relay
Station with the telephone number for the End Receiving Station.
Ex: End Receiving Station : 4681111234
Relay Station
After the Relay Station completes its transmission to the End
Receiving Station(s), your machine receives a COMM. Journal
from the Relay Station.
This Journal confirms whether the Internet Relayed
Transmission was successful.
(Telephone number)
[see note 1]
: uk-rly@london.panasonic.co.uk