Panasonic KX-NS1000 Operating Manual page 298

3.2.1 User Programming
Item
Call Transfer Sequence
(Selection), Call Transfer
Sequence (Other)
No Answer Time (Selection),
No Answer Time (Other)
Call Transfer Status
298 Operating Manual
Specifies the Call Transfer Sequence used by the mailbox. Allows each
mailbox to be assigned its own Call Transfer Sequence (Personal
Transfer Sequence).
1. Select System or Other.
2. If "Other" is specified, enter a maximum of 16 characters consisting
of 0–9, , # and special codes:
•
D: Disconnecting
•
F: Flash (Recall)
•
R: Ringback Tone Detection
•
T: Dial Tone Detection
•
,: Dial Pause (default 1 s)
•
;: Dial Pause (default 3 s)
•
X: Extension Dialling
•
0–9, , #: Dial Code
Specifies the length of time that the Unified Messaging system waits
before handling unanswered calls to the extension.
1.
Select System or Other.
2. If "Other" is selected, specify 10–60 s.
Determines how the Unified Messaging system handles a call when it
reaches your extension.
1. Click Edit.
2.
Select the setting from the following items.
•
None: Rings your extension.
•
Call blocking: Handles the call according to the Incomplete Call
Handling for No Answer setting for your extension. Your
extension will not ring.
•
Call screening: The caller is prompted to record his or her name.
The Unified Messaging system then calls you and plays back the
caller name. You can choose whether to answer the call.
•
Intercom Paging: Pages you by intercom.
•
Transfer to Mailbox: Transfers the caller to the mailbox.
•
Transfer to specified Custom Service Menu : Transfers the
caller to the specified Custom Service.
•
Transfer to specified telephone number 1–5: Transfers the
caller to one of the specified telephone numbers in numerical
order of priority.
3.
Click OK to finish.
Description