Panasonic KX-NS1000 Operating Manual page 252

2.2.1 System Manager Features
1.
Log in to the System Manager's mailbox.
2.
5 1
3.
Enter the mailbox number.
4.
to delete the mailbox.
1
To reset a mailbox password
When a password is forgotten, the System Manager must reset the password before it can be reassigned by
the subscriber.
1.
Log in to the System Manager's mailbox.
2.
5 1
3.
Enter the mailbox number.
4.
to delete the password.
1
•
The System Manager password cannot be reset here. The System Administrator can reset
the System Manager password using Web Maintenance Console.
•
After the password is reset, if the System Administrator has set "Default Password for New
Mailboxes" to "Enable", the password will be set to the default password. If set to "Disable",
the mailbox will have no password.
Setting Class of Service (COS) Parameters
A Class of Service (COS) defines the set of system services available to the mailboxes assigned to it. There
are 514 Classes of Service; they can be assigned to mailboxes by the System Administrator using Web
Maintenance Console or by the System Manager using a telephone. COS No. 513 and No. 514 are
assigned by default to the Message Manager and the System Manager respectively.
•
If the Unified Messaging system is being programmed via Web Maintenance Console, the
System Manager cannot set COS parameters. The system will announce, "Sorry, this
function is not available".
To set COS parameters
Follow the steps detailed below to set the following Class of Service parameters:
Log in to the System
Manager's mailbox.
252 Operating Manual
2
3
5 2
Enter 52.
class of
service no.
Enter the class of
service number (1–64).
Follow system prompts
and set each
parameter below.