Panasonic KX-NS1000 Operating Manual page 24

1.1.5 Before Operating the Telephones
desired no.
extension no.
phone no.
HOLD
When You Use a Panasonic Proprietary Telephone or KX-UT Series SIP
Phone
Panasonic proprietary telephones and KX-UT series SIP phones have useful feature buttons that simplify
some operations. For details, refer to the "Location of Controls" or equivalent section in the documentation
for your phone.
24 Operating Manual
This feature cannot be used with a
single line telephone.
See "Programming" for Related
Programming if necessary.
Off-hook (One of the following).
•
Lift the handset.
•
Press the SP-PHONE button.
•
Press the MONITOR button. (To
start talking, lift the handset.)
•
Press TALK button.
On-hook (One of the following).
•
Hang up.
•
Press the SP-PHONE button.
•
Press the MONITOR button.
•
Press CANCEL button.
Press the corresponding feature
button on the proprietary
telephone, KX-UT series SIP
phone, or S-PS.
Enter the required number.
<Example>
account code
Enter the account code.
Dial an extension number.
Dial the telephone number.
Press the HOLD button on your
SIP phone.
Seize an outside line (One of
the following).
(CO)
OR
•
Press the CO button.
0 / 9
•
OR Dial automatic line access
outside line
number 0/9.
8
group no.
•
Dial outside line group
access number and
outside line group number.
Press the Call button on the
Doorphone.
Press the hookswitch lightly.
Talk or make an
announcement.
You will hear a busy,
confirmation, dial, ring or
ringback tone.
B. Tone: Busy Tone
C. Tone: Confirmation Tone
D. Tone: Dial Tone
R. Tone: Ring Tone
R. B. Tone: Ringback Tone
Dial outside phone number.
outside
phone no.
Press any dial key (0–9,
dial key
#).
Press the REDIAL button on
REDIAL
your SIP phone.
,