Panasonic KX-NS1000 Operating Manual page 183

Switching FWD/DND Status Using Fixed FWD/DND Button
Using a proprietary telephone (PT) or KX-UT series SIP phone (except KX-UT670),
you can easily switch the FWD/DND status for outside/intercom calls without
clearing any FWD destination that was set previously.
•
For KX-UT670 SIP phone users: There is no physical FWD/DND button on the phone. To
set and clear the FWD/DND status, refer to the documentation for your phone.
To switch the FWD/DND status for outside calls
PT
While on-hook (when in FWD/DND Setting Mode)
Press the fixed
FWD/DND button.
To switch the FWD/DND status for intercom calls
PT
While on-hook (when in FWD/DND Setting Mode)
Press the fixed
FWD/DND button.
The current FWD/DND status
for outside calls is displayed.
The current FWD/DND status
2
for intercom calls is displayed.
Enter 2.
1.9.2 Refusing Incoming Calls (Do Not Disturb [DND])
Press the fixed FWD/DND
button again to switch the status.
Press the fixed FWD/DND
button again to switch
the status.
Operating Manual 183