Camera Setting For Recording Conditions; Audio Quality Setting; Automatic Recording Level Adjustments Setting - Zoom Q2N User Manual

Recording
(continued)
ƒ SCENE: camera setting for recording scene conditions
Setting
AUTO
OUTDOOR
SUNSET
NIGHT
CONCERT LIGHT
CONCERT Lo-lit
CONCERT HALL
JAZZ CLUB
DANCE CLUB
REHEARSAL STUDIO Adjustments are optimized for recording and rehearsal studio conditions.
GARAGE
„ LO CUT: low-cut filter setting to reduce wind, vocal pops and other noise
Setting
OFF
80Hz
120Hz
160Hz
… AUDIO: audio quality setting
Setting Explanation
44.1k 16bit
48k 24bit The higher the sampling frequency (kHz) and bit rate, the better the audio quality.
96k 24bit
† AUTO GAIN: automatic recording level adjustments setting
Setting Explanation
OFF This disables Auto Gain. Adjust the recording level manually.
CONCERT This is good for recording band performances, concerts and other loud situations.
SOLO This is good for solo performances and other lower volume situations.
MEETING This is good for meetings and field recordings.
NOTE
Using the windscreen included in the APQ-2n accessory pack along with the LO CUT setting can further
reduce noise.
Explanation
Adjustments are made without specific scene conditions.
Adjustments are optimized for outdoor recording.
Adjustments are optimized for sunset scenes.
Adjustments are optimized for night and other dark situations.
Adjustments are optimized for concert lighting conditions that are bright
and change drastically.
Adjustments are optimized for small concert halls and other dim lighting conditions.
Adjustments are optimized for classical concerts, recitals and similar perfor-
mance conditions.
Adjustments are optimized for jazz clubs and similar venues.
Adjustments are optimized for dance clubs and other venues where the
lighting changes drastically.
Adjustments are optimized for band performances in garages.
Explanation
This disables the lo-cut filter.
These set the cutoff frequency.
13