Setting Item List - Zoom Q2n-4K Quick Manual

Setting item list

From the Recording Screen, press
use the following functions and settings.
Page 1
Item
NTSC/PAL
Beep
Play Mode
Plug-in Power
SD Format
Page 2
Item
WEBCAM
CARD READER
CARD READER for
iOS
USB MIC
USB MIC for iOS
Page 3
Item
Date/time
Page 4
Item
Battery Type
Power Save
Auto Power Off
Language
Setting Reset
Explanation
This sets the standard recording frame rate used according to the re-
gional video format. [NTSC (30 FPS)/PAL (25 FPS)]
Set the volume of the sound made when turned on or operated.
[ / / ]
Set whether files are played continuously or playback stops after one
file. [Play One/Play All]
Set when using a mic that supports plug-in power. [On/Off]
Format an SD card.
Explanation
Use as a web camera.
Use as a card reader when connected to a computer.
Use as a card reader when connected to an iOS device.
Use as a USB mic when connected to a computer.
Use as a USB mic when connected to an iOS device.
Explanation
Set the date and time. [Year, Month, Day, Hour and Min]
Explanation
This sets the type of batteries used. [Alkaline/Ni-MH/Lithium]
Set to dim the display automatically if not used for a certain amount of
time. This is disabled during playback. [Off/1 min/3 min/5 min]
Set the amount of time until it turns off automatically when not being
used. This function is disabled during recording and playback as well as
when it is powered through its USB port. [Off/1 min/3 min/5 min]
Set the language shown on the display.
Restore the recorder to its factory default settings.
to open the Setting Screen where you can
6