Registration Of Input Signal Data - Panasonic PT-DW100E Operating Instructions Manual

Registration of input signal data

MENU
The input signal data must be registered because
it is not registered on shipment of the projector.
MENU
Press to display the MAIN
MENU screen.
Press to select "SIGNAL
LIST".
Press to display the
"REGISTERED SIGNAL
LIST" menu.
• The memories extend
over 12 pages (A to L with
8 data items each, giving
a total of 96 memories).
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
DISPLAY LANGUAGE
DISPLAY OPTION
PROJECTOR SETUP
P IN P
TEST PATTERN
SIGNAL LIST
SECURITY
NETWORK
MENU SELECT
SUB MENU
ENTER
Registration of new data
When a new signal is supplied, press MENU on the
remote control or operating section of the main unit.
When its data has been registered, the "MAIN MENU"
screen is displayed.
Note
• The data of 96 input signals can be registered.
• The signals supporting the installed input module
▲▼◄►
are input and their data registered.
ENTER
• The memories are numbered over 12 pages (A to L:
8 data items can be registered on each page), and
the data is registered in the unused memory with
the lowest number. If all the memories are used, the
data of the old signals is overwritten in sequence.
• The names of the registered data are automatically
determined by the input signals and memory
numbers.
• If a menu is being displayed, the new signals will be
DEFAULT
registered at the instant they are input.
Renaming the registered signals
Press ▲▼◄ ► to select the
1.
signal whose details are to be
displayed.
REGISTERED SIGNAL LIST
A1:SVGA72-A1
A2:SVGA72-A2
A3:SVGA72-A3
2. Press ENTER.
• The "REGISTERED SIGNAL STATUS" screen
will be displayed.
REGISTERED SIGNAL STATUS
NAME
MEMORY NO
INPUT
fH
fV
SYNC.STATE
• The data items including the input signal name,
memory number, input terminal, frequency and
sync signal are automatically identified and
displayed.
• When MENU is pressed, the "REGISTERED
SIGNAL LIST" screen is restored.
3. Press ENTER.
• The "RENAME" screen will be displayed.
RGB1 −−−
RGB1 −−−
RGB1 −−−
SVGA72-A2
A2
RGB1
48.08kHz
72.17Hz
H(POS)
V(POS)
ENGLISH – 43