Projector Main Unit - Panasonic PT-DW100E Operating Instructions Manual

Location and function of each part (continued)

Projector Main Unit

Front
7
1 Projection lens cover ･･････････････････ (p. 34)
2 Projection lens (optional)
Lens for projecting images on the screen.
3 Remote control receiver window (front)
･･････････････････････････････････････ (p. 17)
This window receives the signal beam emitted
from the remote control.
4 LAMP (LAMP1, LAMP2, LAMP3, LAMP4)
monitor ･････････････････････････････ (p. 109)
These light when it is time to replace the lamp unit.
It also blinks if something unusual occurs in the
lamp circuit.
5 Temperature monitor (TEMP) ･････････ (p. 109)
Lighting or blinking of this lamp indicates an
abnormal condition of the internal temperature.
6 Power indicator lamp ･････････････････ (p. 35)
The lamp lights in red when the MAIN POWER
switch is turned to " l " (on). It turns to green when
the POWER ON button of the remote control or
the main unit is pressed.
7 Air intake vents
Do not cover this vents.
8 Burglar hook
Attach a commercial burglar prevention cable to
this hook port.
9 Adjustable feet ･･･････････････････････ (p. 20)
Use these feet to adjust the tilt of the projector.
(Adjustable feet are provided at the front and rear,
right and left.)
14 – ENGLISH
1 2 3 4 5 6
8 9 j k l m
Rear
n
p q
j Projection lens cover lock button ･･････ (p. 34)
This button toggles between lock and unlock
of the detachable cover for the projection lens
(optional).
k Air filter ･････････････････････････････ (p. 110)
l Air filter cleaning monitor･････････ (pp. 79, 110)
This blinks blue while the air filter is being cleaned.
It lights red when there is a problem with the air
filter.
m Filter cleaning unit fixing screw ･･･････ (p. 110)
This is used to secure the air filter cover.
n Air exhaust vents
Hot air comes out of the air exhaust vents.
o Lamp unit cover screw ･･･････････････ (p. 113)
p Remote control receiver window (rear) ･ (p. 17)
This also receives the signal beam coming from
the remote control.
q Remote control receiver window (bottom)
･･････････････････････････････････････ (p. 17)
This also receives the signal beam coming from
the remote control.
r Air intake vents
Do not cover this vents.
s Lamp unit cover ･････････････････････ (p. 113)
The lamp unit is housed.
o
r s