Panasonic PT-DW100E Operating Instructions Manual page 31

Connecting the signal to the SD-SDI input module
SD-SDI input module (optional)
ET-MD77SD1 (for 480i/576i)
Note
• If a source with an unstable signal is connected, errors in automatic signal recognition may occur. If this
happens, use the SYSTEM SELECTOR menu to switch the format to the one which matches the signals being
input.
• You can switch the input format mode from the SYSTEM SELECTOR menu. (pp. 56-57)
*1: The LAN terminal of the input module (optional) cannot be used. Use the LAN terminal that is provided as
standard with the projector.
Connecting the signal to the HD/SD-SDI input module
HD/SD-SDI input module (optional)
ET-MD77SD3 (for HD/SD)
Note
• You can switch the input format mode from the SYSTEM SELECTOR menu. (pp. 56-57)
• If a source with an unstable signal is connected, errors in automatic signal recognition may occur. If this
happens, use the SYSTEM SELECTOR menu to switch the format to the one which matches the signals being
input.
• To ensure full imaging performance, use a connecting cable with the specifications of 5CFB or higher, or of
Belden1694A or higher.
(For example: 5CFB, 5CFTX, 7CFB, Belden1694A, etc.)
*1: The LAN terminal of the input module (optional) cannot be used. Use the LAN terminal that is provided as
standard with the projector.
SD-SDI Module
IN
ET-MD77SD1
SD-SDI signal
Business digital
VCR
HD/SD-SDI
Module
ET-MD77SD3
HD-SDI or SD-SDI
signal
Business digital
VCR
OUT
SERIAL LAN
LAN terminal
(10BASE-T/100BASE-TX)
SD-SDI signal output
(active through)
IN OUT
SERIAL LAN
LAN terminal
(10BASE-T/100BASE-TX)
HD-SDI or SD-SDI
signal output
(active through)
*1
*1
ENGLISH – 31