Side
l AUTO SET UP button ・・・・・・・・・・・・・・・・・・ (p. 47)
Pressing this button while projecting an image
automatically corrects the picture positioning
on the screen. While the auto setup feature is
active, a message "PROGRESS..." appears on the
screen.
m SHUTTER button ・・・・・・・・・・・・・・・・・・・・・ (p. 46)
Press this button to black out the image
temporarily.
n ASPECT button ・・・・・・・・・・・・・・・・・・・・・・・ (p. 48)
Switches the image aspect ratio.
o LENS (FOCUS, ZOOM, SHIFT) button ・・・ (p. 38)
These buttons are used to adjust the projection
lens.
p Function 1 (FUNC1) button ・・・・・・・・・・・・ (p. 47)
This button can control the functions set in
"FUNC1" of the "PROJECTOR SETUP" screen
from MAIN MENU.
q DEFAULT button ・・・・・・・・・・・・・・・・・・・・・・ (p. 51)
Press this button when you want to restore the
setting of the item selected in the menu to the
factory default value.
r ID SET button ・・・・・・・・・・・・・・・・・・・・ (pp. 18, 75)
When two or more main units are used in the
system, this button specifies the ID of the remote
control.
t
Top
Bottom
s ID ALL button ・・・・・・・・・・・・・・・・・・・・・ (pp. 18, 75)
When two or more main units are used in the
system, this button switches to the mode to
control them simultaneously with a single remote
control.
t LOCK button
This button is used to prevent unintentional
operation of the projector by accidentally pressing
a button, and to prevent the remote control
batteries from becoming spent.
u Remote control transmitter window
Operate the remote control aiming at the remote
control receiver window on the main unit.
v Remote control wired terminal ・・・・・・・・・ (p. 18)
To use the wired output terminal, connect the
remote control and the main unit with the cable
(sold separately).
Note
•
The AUX button to switch the input is disabled
when an optional input module is not connected.
u
v
ENGLISH – 13