Connection Terminals - Panasonic PT-DW100E Operating Instructions Manual

Location and function of each part (continued)

Connection terminals

1 REMOTE1 lN/OUT terminal ････････････ (p. 18)
When two or more main units are used in the
system, they can be connected and controlled
with a wired remote control cable (M3 jack).
2 REMOTE2 IN terminal ････････････････ (p. 108)
The user can remotely control the main unit by
using an external control circuit to this terminal
(D-SUB 9-pin female).
3 SERIAL IN terminal････ (pp. 26-27, 78, 104-107)
This terminal is an RS-232C compliant input
terminal (switching necessary) to connect a PC
and to externally control the main unit (D-SUB
9-pin female).
4 SERIAL IN terminal････ (pp. 26-27, 78, 104-107)
This terminal is an RS-422 compliant input
terminal (switching necessary) to connect a PC
and to externally control the main unit (D-SUB
9-pin female).
5 SERIAL OUT terminal ････････(pp. 27, 104-107)
This terminal is an RS-422 compliant output
terminal (switching necessary) to supply signals
given to the serial input terminal (D-SUB 9-pin
male).
16 – ENGLISH
1 2
7 8 9
3 4
j k l
6 LAN terminal (10BASE-T/100BASE-TX)
･･･････････････････････････････ (pp. 26-27, 91)
This terminal is used for connecting a LAN cable.
7 VIDEO IN terminal･････････････････････ (p. 26)
An input terminal for video signals. (BNC)
8 VIDEO OUT terminal ･･････････････････ (p. 26)
An output terminal (active through) for video
signals. (BNC)
9 S-VIDEO IN terminal ･･････････････････ (p. 26)
An input terminal for S-video signals (Mini DIN
4-pin). This terminal complies with S1 signals
and automatically toggles between 16:9 and 4:3
according to the size of input signals.
j RGB (YP
P
B R
A terminal to input RGB or YP
k RGB2 IN terminal ･････････････････････ (p. 27)
A terminal to input RGB or YP
15-pin female).
l DVI-D IN terminal ･････････････････ (pp. 26, 27)
An input terminal for DVI-D signals.
5 6
) 1 IN terminal ･････････ (pp. 26, 27)
P signals (BNC).
B R
P signals (D-SUB
B R