Cruise Control Indicator Light; Cruise Control Set Indicator Light - Subaru 2012 Forester Owner's Manual

by pressing the "RES/ACC" button quickly.
! To increase the speed (by accel-
erator pedal)
1. Depress the accelerator pedal to
accelerate the vehicle to the desired
speed.
2. Push the "SET/COAST" button once.
Now the desired speed is set and the
vehicle will keep running at that speed.
NOTE
If the difference between the actual
vehicle speed when the button is
pushed and the speed last time you
set is less than 4 mph (6.8 km/h), the
vehicle speed will be lowered by 1 mph
(1.6 km/h). This occurs because the
cruise control system unit regards this
operation as that intended to decrease
the vehicle speed.
! To decrease the speed (by button)
Push the "SET/COAST" button and hold it
until the vehicle reaches the desired
speed. Then, release the button. The
vehicle speed at that moment will be
memorized and treated as the new set
speed.
When the difference between the actual
vehicle speed and the set speed is less
than 4 mph (6.8 km/h), the set speed can
be lowered 1 mph (1.6 km/h) each time by
pressing the "SET/COAST" button quickly.
! To decrease the speed (by brake
pedal)
1. Depress the brake pedal to release
cruise control temporarily.
2. When the speed decreases to the
desired speed, press the "SET/COAST"
Starting and operating
button once. Now the desired speed is set
and the vehicle will keep running at that
speed.
& Cruise control indicator light
Refer to "Cruise control indicator light"
F3-25.
& Cruise control set indicator
light
Refer to "Cruise control set indicator light"
F3-25.
7-35