Speedometer; Odometer/Trip Meter - Subaru 2012 Forester Owner's Manual

3-8
Instruments and controls
2. Press the trip knob to show "
" " on the trip meter display. The display
can be switched as shown in the following
sequence by pressing the trip knob.
*: " " or " ", and " " or "
be displayed when the ignition switch is
in the "ON" position.
3. To change the current setting, press
the trip knob for at least 2 seconds.
: Activated
: Deactivated
NOTE
The initial illumination setting of the
meter needles/gauge of your vehicle
has been set for activation "
time of shipment from the factory.
& Speedometer
The speedometer shows the vehicle
speed.
" or
" cannot
& Odometer/Trip meter
" at the
Type A
1) Trip knob
Type B
1) Trip knob