Folder Selection; How To Eject A Cd From The Player (Type A, C And D Audio); How To Eject Cds From The Player (Type B) - Subaru 2012 Forester Owner's Manual

Hide thumbs Also See for 2012 Forester:
Table of Contents

Advertisement

5-28
Audio
& Folder selection
NOTE
. Selecting folders in this way is
possible only within a single disc.
. Only MP3/WMA/AAC folders are re-
cognized when an attempt to select the
next or previous folder is made. If no
appropriate folder exists on the disc,
pressing the "
" or "
"FOLDER/PTY/CAT" button starts play-
back beginning with the first track.
Press the following buttons briefly.
Type A and B audio:
To select the next
folder
To go back to the
previous folder
Type C audio:
To select the next
folder
To go back to the
previous folder
Type D audio:
To select the next
folder
To go back to the
previous folder
& How to eject a CD from the
" side of the
player (type A, C and D
audio)
When a disc is being played back or when
a disc is in the player, press the
button. The disc will be ejected.
NOTE
. Avoid driving the vehicle with a CD
sticking out. Vibration might make it fall
out.
. If the disc is left ejected for more
than approximately 15 seconds after
the ignition switch is turned to the
"OFF" position, a disc protection func-
tion will operate, automatically reload-
ing the disc. In this case, the disc is not
played.
& How to eject CDs from the
player (type B)
! Ejecting a CD from the player
You can select and remove only one disc
at a time from the discs that are loaded.
1. Use the disc select button (from
to
) to select the disc to be ejected.
2. Briefly press the
selected disc will be ejected. The disc
number indicator will flash at this time.
When you remove the ejected disc, the
disc number indicator will turn off.
To remove more discs in succession,
repeat steps 1 and 2.
! Ejecting all discs from the player
(all disc ejection mode)
1. If you continue to press the
button, the player will produce beep sound
and will enter the all disc ejection mode. At
this time, the disc number indicator and
"ALL EJECT" indicator will flash.
2. Remove the disc that has been
ejected. The other discs loaded will then
be ejected one after another. If you do not
remove the disc that has been ejected, the
"All disc ejection mode" will be canceled.
button. The

Advertisement

Table of Contents
loading

Table of Contents