Subaru 2010 Tribeca Owner's Manual page 165

Hide thumbs Also See for 2010 Tribeca:

Table of Contents

6. Take up the slack in the lap belt.

7. Pull out the seatbelt fully from the

retractor to change the retractor over from

the Emergency Locking Retractor (ELR)

to the Automatic Locking Retractor (ALR)

function. Then, allow the belt to rewind

into the retractor. As the belt is rewinding,

clicks will be heard which indicate the

retractor functions as ALR.

8. Push and pull the child restraint

system forward and from side to side to

check if it is firmly secured.

Sometimes a child restraint can be more

firmly secured by pushing it down into the

seat cushion and then tightening the

9. Pull at the shoulder portion of the belt

to confirm that it cannot be pulled out (ALR

properly functioning).

Seat, seatbelt and SRS airbags

10. To remove the child restraint system,

press the release button on the seatbelt

buckle and allow the belt to retract

completely. The belt will return to the

NEVER INSTALL A REARWARD FA-

CING CHILD SEAT IN THE FRONT

PASSENGER'S SEAT. DOING SO

RISKS SERIOUS INJURY OR DEATH

TO THE CHILD BY PLACING THE

CHILD'S HEAD TOO CLOSE TO THE

– CONTINUED –

Chapters

Table of Contents