Setting The Angle Mark Display - Subaru 2010 Tribeca Owner's Manual

Hide thumbs Also See for 2010 Tribeca:

Table of Contents

* This figure shows the screen for setting the

audio language.

Setting the Angle Mark Display

If you wish to set a language not included in the list of languages that appears on

the SETUP MENU screen, highlight "OTHERS" in the second step above and enter

the code of the desired language (refer to the language code list on Page 55) using

the joystick. After entering the code, press the "ENTER" button.

To revert to the SETUP MENU screen, highlight the "

and then press the "ENTER" button.

This setting allows you to decide whether or not the angle mark is to be displayed

on the screen. If you select "ON" in the procedure below, the angle mark is displayed

at the top left portion of the screen whenever a multi-angle recorded scene is en-

countered during playback. Refer to Page 34 for information on the multi-angle re-

corded scenes.

Initial Settings

" switch with the joystick,

Table of Contents